Nickel (II) tetrapyridyl complexes as electrocatalysts and precatalysts for water oxidation

Two nickel complexes, [Ni(tpen)](ClO₄)₂.0.5CH₃COCH₃ ( 1 ) and [Ni(tpbn)](ClO₄)₂ ( 2 ), of tetrapyridyl ligands N,N,N′,N′-tetrakis(2-pyridyl-methyl)-1,2-ethanediamine (tpen) and N,N,N′,N′-tetrakis(2-pyridyl-methyl)-1,4-butanediamine (tpbn) were prepared and their catalysis for water oxidation reaction (WOR) studied. In 0.1 M phosphate buffer solution (PBS) of pH 8.0, complex 1 is a homogeneous molecular catalyst with an overpotential of ~440 mV and a Faradaic efficiency of 89%. At pH ≥ 9.0, complex 1 degraded gradually during the catalytic process and formed NiO_x composite (nickel oxide with general formula Ni_xO_yH_z) active for WOR. In contrast, complex 2 deteriorated under measured conditions (pH 8.0–12.0) and formed NiO_x composite active for WOR. The NiO_x composite derived from 1 in 0.1 M PBS at pH 11.0 showed an activity with an overpotential of ~500 mV, a Tafel slope of ~90 mV/decade and a Faradaic efficiency of 97%. Mechanisms were proposed for water oxidation catalyzed by 1 and 2 . This work revealed that the catalytic activity of the nickel complexes was related to the flexibility of the tetrapyridyl ligands and the adaptability of the coordination sphere of the nickel(II) center.     

Synthesis and characterization of PEGylated iron and graphene oxide magnetic composite for curcumin delivery

Nowadays, nanostructures have been given significant attention in medical and biological fields. Among these nanostructures, graphene oxide (GO) has been widely used in drug delivery systems, because of its unique properties, and the ability to connect to other nanostructures such as magnetic nanoparticles (NPs) as well as polymers by its functional groups. In this research, first, GO was prepared by exfoliating graphite according to the modified Hummer’s method, and then the Fe₃O₄ NPs were synthesized by a simple co-precipitation method on GO nanosheets. In the next step, with the help of the ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide coupling reagents, the polyethylene glycol (PEG) polymer was bonded to the GO-Fe₃O₄ nanocomposite. Finally, anti-cancer drug, curcumin (Cur) was loaded onto the nanocomposite and the Cur loading ratio was measured at about 8%. The samples were evaluated using Fourier transform-infrared, differential scanning calorimtery, vibrating-sample magnetometry, atomic force microscopy and dynamic light scattering techniques. The results show that the prepared nanocomposite is an appropriate candidate for biomedical applications.     

Synthesis of acetamides via oxidative C–C bond cleavage of ketones catalyzed by Cu-immobilized magnetic nanoparticles

Copper supported on magnetite nanoparticles modified with environmentally friendly ligand tricine was devised for synthesis of acetamides via C–C oxidative cleavage of ketones with amines. The catalyst was characterized using different techniques, including Fourier transform infrared, X-ray diffraction, scannin electron microscopy, vibrating sample magnetometry, thermogravimetric analysis, and energy dispersive x-ray spectroscopy. The protocol showed relatively high yields of acetamide products. Furthermore, the magnetic recovery of the catalyst rendered the overall process fast and efficient. It was used in the reaction for six consecutive cycles with negligible loss of catalytic activity. This research is the first report of application of magnetic nanocatalysts for synthesis of acetamides from ketones of low activity through a C–C bond cleavage strategy.     

Controlled synthesis of ZnO nanoparticles from a Zn(II) coordination polymer: Structural characterization,optical properties and photocatalytic activity

A zinc coordination polymer derived from pyridine-2,6-dicarboxylate (PDC), {[Zn₂(PDC)₂]}_n, was successfully prepared via conventional, sonication and microwave-irradiation methods. The composition and characteristics of the obtained coordination polymers (CPs) were investigated by elemental analysis, TGA/DTA, X-ray diffraction and spectroscopic techniques. The so obtained CPs were heat-treated in the air at 600 °C for 2 h to produce ZnO of nanosized particles (NPs). It is of interest to note that the synthesis approach of the precursor greatly affects both the nanoparticle size and the structure of the resulting ZnO NPs. Moreover, the smallest particle size was associated with the sample derived from the ultrasonically prepared precursor. TEM analysis revealed that all samples have sphere-like morphologies. Structural analysis of the prepared ZnO samples was conducted and compared using Rietveld analysis of their PXRD patterns. Optical band gap calculations based on analysis of the UV–vis spectra of ZnO samples using Tauc's power law were achieved. The highest band gap of 3.63 eV was observed for ZnO sample obtained from the ultrasonically prepared precursor. Furthermore, the photocatalytic activity of ZnO NPs for the removal of Eosin Y color was monitored. The highest removal efficiency was recorded for ZnO originated from the ultrasonically synthesized precursor. Enhancement of removal efficiency that reached 98% was attained in only a period of 8 min. Its recycling test showed that it can be reused without structural changes over four cycling experiments.     

Design,preparation, and characterization of Fe3O4 nanoparticles encapsulating β-cyclodextrin-bearing guanidine as a highly efficient and reusable heterogeneous base catalyst for synthesis of 3,4-dihydropyrano[3,2-c]chromenes

Chromene substructure is an important structural motif present in a variety of medicines, natural products, and materials showing biological activities. Here, a simple and convenient procedure for the synthesis of 3,4-dihydropyrano[3,2-c]chromene derivatives is described. For this purpose, Fe₃O₄ nanoparticles supported on β-cyclodextrin-guanidine were successfully prepared and used as catalyst. The structure of this catalyst was assigned by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, thermal gravimetric analysis, and vibrating sample magnetometer techniques. The prepared nanocomposites were used as a highly active, heterogeneous, and reusable nanocatalyst for the one-pot, three-component reaction of 4-hydroxycoumarin, aromatic aldehydes, and ethyl cyanoacetate. This method has advantages such as mild conditions, high yields, easy workup and simple purification of products, little catalyst loading, cost efficiency, and reusability of the catalyst.     

Influence of bidentate phosphine ligands on the chemistry of [FeFe]-hydrogenase model: insight into molecular structures and electrochemical characteristics

Substitution of carbonyl ligands of the hydrogenase model complex [Fe₂(μ-SeCH₂CH(Me)CH₂Se-μ)(CO)₆] ( A ), by 1,1′-bis (diphenylphosphino)ferrocene (dppf), 1,2-bis (diphenylphosphino)benzene (dppbz) or 1,2-bis (diphenylphosphino)acetylene (dppac) is investigated. It is found that the reaction product depends on the diphosphine used. In the case of dppf, the product is an intramolecular bridged disubstituted complex [Fe₂{μ-SeCH₂CH(Me)CH₂Se-μ}(CO)₄{μ,κ¹,κ¹(P,P)-dppf}] ( 1 ), while the dppac-reaction produces an intermolecular bridged tetra-iron model [Fe₂{μ-SeCH₂CH(Me)CH₂Se-μ}(CO)₅]₂{μ,κ¹,κ¹(P,P)-dppac} ( 2 ). However, the dppbz-reaction gives [Fe₂{μ-SeCH₂CH(Me)CH₂Se-μ}(CO)₄{κ²(P,P)-dppbz}] ( 3 ) in which the dppbz ligand is bonded to one Fe atom in a chelated manner. The newly prepared complexes ( 1 – 3 ) have been characterized by elemental analysis, IR, ¹H-, ¹³C{H}-, ³¹P{H}-, ⁷⁷Se{H}-NMR spectroscopy and X-ray structure determination. The electrochemical behavior of 2 and 3 , in absence and presence of acid, is described by cyclic voltammetric measurements in CH₂Cl₂.     

Hydroxylation of Aromatics by H2O2 Catalyzed by Mononuclear Non-heme Iron Complexes: Role of Triazole Hemilability in Substrate-Induced Bifurcation of the H2O2 Activation Mechanism

Rieske dioxygenases are metalloenzymes capable of achieving cis-dihydroxylation of aromatics under mild conditions using O₂ and a source of electrons. The intermediate responsible for this reactivity is proposed to be a cis-Fe^V(O)(OH) moiety. Molecular models allow the generation of a Fe^III(OOH) species with H₂O₂, to yield a Fe^V(O)(OH) species with tetradentate ligands, or {Fe^IV(O); OH^.} pairs with pentadentate ones. We have designed a new pentadentate ligand, mtL₄², bearing a labile triazole, to generate an “in-between” situation. Two iron complexes, [(mtL₄²)FeCl](PF₆) and [(mtL₄²)Fe(OTf)₂]), were obtained and their reactivity towards aromatic substrates was studied in the presence of H₂O₂. Spectroscopic and kinetic studies reflect that triazole is bound at the Fe^II state, but decoordinates in the Fe^III(OOH). The resulting [(mtL₄²)Fe^III(OOH)(MeCN)]²⁺ then lies on a bifurcated decay pathway (end-on homolytic vs. side-on heterolytic) depending on the addition of aromatic substrate: in the absence of substrate, it is proposed to follow a side-on pathway leading to a putative (N₄)Fe^V(O)(OH), while in the presence of aromatics it switches to an end-on homolytic pathway yielding a {(N₅)Fe^IV(O); OH^.} reactive species, through recoordination of triazole. This switch significantly impacts the reaction regioselectivity.     

Photo-recycling the Sacrificial Electron Donor: Towards Sustainable Hydrogen Evolution in a Biphasic System

H₂ may be evolved biphasically using a polarised liquid|liquid interface, acting as a “proton pump”, in combination with organic soluble metallocenes as electron donors. Sustainable H₂ production requires methodologies to recycle the oxidised donor. Herein, the photo-recycling of decamethylferrocenium cations (DcMFc⁺) using aqueous core-shell semiconductor CdSe@CdS nanoparticles is presented. Negative polarisation of the liquid|liquid interface is required to extract DcMFc⁺ to the aqueous phase. This facilitates the efficient capture of electrons by DcMFc⁺ on the surface of the photo-excited CdSe@CdS nanoparticles, with hydrophobic DcMFc subsequently partitioning back to the organic phase and resetting the system. TiO₂ (P25) and CdSe semiconductor nanoparticles failed to recycle DcMFc⁺ due to their lower conduction band energy levels. During photo-recycling, CdS (on CdSe) may be self-oxidised and photo-corrode, instead of water acting as the hole scavenger.     

消光式核壳二聚体传感器的设计与光谱特性分析

根据ITO/Au纳米核壳二聚体粒子在生物医学领域的应用合理性,设计了一种实时检测生物液体的核壳二聚体探针消光式传感器;由偶极子理论推导出输出波长与外界环境折射率关系;利用MATLAB设计ITO/Au纳米核壳二聚体粒子结构;采用软件DDSCAT7.3结合离散偶极近似法,利用二聚体有效半径模拟计算了300~950nm可见光到红外光波段不同核壳比、二聚体间距、以及不同介质折射率的消光光谱;根据传感芯片折射率与偶极共振、耦合八级共振的响应关系得出ITO/Au二聚体的折射率灵敏特性。与传统Ag/Au核壳纳米粒子相比,ITO/Au纳米核壳二聚体结构引入了可作为传感芯片灵敏性自参考参数的耦合八级共振峰,同时ITO/Au二聚体结构的折射率灵敏度可达到419nm/RIU。这些工作及其结果对制作消光式传感器具有重要的意义。